Home
→
DEPARTMENT OF MECHANICAL ENGINEERING
→
CONFERENCE/ WORKSHOP/ SEMINAR
→
Browsing CONFERENCE/ WORKSHOP/ SEMINAR by Issue Date

Browsing CONFERENCE/ WORKSHOP/ SEMINAR by Issue Date

Now showing items 1-20 of 20

Plant Layout Modification using Systematic Layout Planning & Graph Theory

Gia, Elizabeth (2014)

This paper focuses on the modification of the existing layout of a rubberised coir mattress factory using two different approaches viz SLP (Systematic Layout Planning) and graph theory. The preliminary problem identification ...
Cryogenic Treatment to Minimize Flank Wear of AISI M2 HSS Tools

Praveenkumar, B S (2014)

Cryogenic treatment has been acknowledged by some as means of extending tool life of many cutting tool materials, thus improving productivity significantly. However real mechanisms which guarantee better tool performance ...
Evaluation of Mechanical Properties and Microstructure of LM6 (AL-Si 12%) - Boron Nitride Particulate Reinforced Composites

Shivanna (2014)

The composites of Aluminium and its alloy are finding extensive application in industries like automobile, aerospace and marine field. This popularity of these composites may be attributed to the reason that these ...
Design of Dual Media Electro Hydraulic Servo Actuator for Missile Application

V, Ramesh Babu (2014)

Every Missile requires some guidance or steering to ensure that the required flight trajectory is achieved. Missiles are equipped with either Aerodynamic control system or Thrust vector control system to provide the ...
A Review on the Future of Biomimicry in the Field of Design

Mervin Jose, Thomas (2014)

The word biomimicry is a combination of the two Greek words bios (life) and mimesis (imitation). Biomimicry is a discipline that turns to the natural world for ideas and solutions. In the past decade, bionic research and ...
Design of Hydraulic Door Opening System in Digester for Titanium Dioxide Plant

Shahul, Backer (2014)

Titanium Dioxide plant is a leading profit earning enterprise. Titanium di oxide (TiO2) is mainly used in paint industry. It is also used in inks, plastics, textiles, ceramics etc. India is one of the most prospective ...
Design of an Accuracy Control System in Ship Building Industry

Eldho, Paul (2014)

Ship production involves many stages of fabrication process. Throughout these processes it is expected that dimension variance may occur and if not managed properly it could cause dimensional problems which will lead to ...
Static Analysis of “Sun2Car” Solar Platform Subjected to Wind Load

Alex, Mathew (2014)

This paper deals with the design and finite element based static analysis of a solar panel supporting structure which is used as a fuel station in green automobile engineering. The present work is a part of the project ...
Design and Development of an Automated Solar-Biomass Hybrid Rubber Sheet Drying System

Jisso, Thomas (2014)

Rubber Industry is a prominent industry all over the world since natural rubber can be made to use in a number of ways. Thus it is a major form of economy in regions suitable for natural rubber plantation like India, Thailand ...
Nonlinear Finite Element Analysis of Coupled Shear Wall

Merin, Mathews (2014)

For medium and high-rise building the use of shear wall is indispensable, since they resist lateral loads very efficiently. Several modeling techniques are suggested for the evaluation of elastic and inelastic behavior ...
Effect of Surface Crack in a Composite Homogeneous Steel Cantilever Beam in Different Conditions by using Finite Element Method

Arun Sasi, S J (2014)

The vibrational analysis of a composite cantilever beam is consider in this paper, the finite element method is used to find the frequencies and mode shapes of the cantilever beam for cracked and uncracked conditions. ...
Design and Analysis of Wing Structure of Solar UAV

Suresh, R (2014)

This paper deals with UAVs that are envisaged to fly solely with the help of solar power. The power required to keep these solar powered UAVs airborne is produced by solar cells. The objective is to design and analysis ...
Recoil Reduction in a Rifle to Improve the Accuracy of the bullet

Avinash, P (2014)

Recoil also called knockback or kickback is the backward momentum of a gun when it is discharged. The recoil caused by the gun exactly balances the forward momentum of the projectile and exhaust gasses according to ...
Smart Helmet Using RF Technology for Underground Mines

Shabina, S (2014)

The underground mines all over the world are adversely affected by various hazards including gaseous explosions, landslides, fire hazards, etc. This leads to the significance of safety for the mine workers. A better ...
Experemental studies and design of a flight capable cyclocopter

Moble, Benedict (2014-01-20)
iDEM:-International Conference Procedings

Unknown author (2014-11-27)
ADVANCEMENTS IN CRYOCOOLER TECHNOLOGIES AND HYBRID CRYOCOOLERS

ANVAR, V A (2015-01-12)
CRYOGENIC MATERIAL PROPERTIES DATABASE

MARQUARDT, E.D; LE, J.P (2015-02)
STUDY OF CRYOGENIC CYCLES WITH ASPEN - HYSYS SIMULATIONS

Unknown author (2015-02-12)
CRYOGENIC REFRIGERATION SYSTEMS AS AN ENABLING TECHNOLOGY IN SPACE SENCING MISSIONS

ROBERT, T; ROUSH, F (2015-02-12)

Browsing CONFERENCE/ WORKSHOP/ SEMINAR by Issue Date

Browsing CONFERENCE/ WORKSHOP/ SEMINAR by Issue Date

Search Digital Library

Browse

All of Digital Library

This Community

My Account