• STUDY OF CRYOGENIC CYCLES WITH ASPEN - HYSYS SIMULATIONS 

  Unknown author (2015-02-12)
• CRYOGENIC REFRIGERATION SYSTEMS AS AN ENABLING TECHNOLOGY IN SPACE SENCING MISSIONS 

  ROBERT, T; ROUSH, F (2015-02-12)
• ADVANCEMENTS IN CRYOCOOLER TECHNOLOGIES AND HYBRID CRYOCOOLERS 

  ANVAR, V A (2015-01-12)
• Cryogenic Treatment to Minimize Flank Wear of AISI M2 HSS Tools 

  Praveenkumar, B S (2014)

  Cryogenic treatment has been acknowledged by some as means of extending tool life of many cutting tool materials, thus improving productivity significantly. However real mechanisms which guarantee better tool performance ...
• Evaluation of Mechanical Properties and Microstructure of LM6 (AL-Si 12%) - Boron Nitride Particulate Reinforced Composites 

  Shivanna (2014)

  The composites of Aluminium and its alloy are finding extensive application in industries like automobile, aerospace and marine field. This popularity of these composites may be attributed to the reason that these ...
• Plant Layout Modification using Systematic Layout Planning & Graph Theory 

  Gia, Elizabeth (2014)

  This paper focuses on the modification of the existing layout of a rubberised coir mattress factory using two different approaches viz SLP (Systematic Layout Planning) and graph theory. The preliminary problem identification ...
• A Review on the Future of Biomimicry in the Field of Design 

  Mervin Jose, Thomas (2014)

  The word biomimicry is a combination of the two Greek words bios (life) and mimesis (imitation). Biomimicry is a discipline that turns to the natural world for ideas and solutions. In the past decade, bionic research and ...
• Static Analysis of “Sun2Car” Solar Platform Subjected to Wind Load 

  Alex, Mathew (2014)

  This paper deals with the design and finite element based static analysis of a solar panel supporting structure which is used as a fuel station in green automobile engineering. The present work is a part of the project ...
• Design and Development of an Automated Solar-Biomass Hybrid Rubber Sheet Drying System 

  Jisso, Thomas (2014)

  Rubber Industry is a prominent industry all over the world since natural rubber can be made to use in a number of ways. Thus it is a major form of economy in regions suitable for natural rubber plantation like India, Thailand ...
• Nonlinear Finite Element Analysis of Coupled Shear Wall 

  Merin, Mathews (2014)

  For medium and high-rise building the use of shear wall is indispensable, since they resist lateral loads very efficiently. Several modeling techniques are suggested for the evaluation of elastic and inelastic behavior ...
• Design of Hydraulic Door Opening System in Digester for Titanium Dioxide Plant 

  Shahul, Backer (2014)

  Titanium Dioxide plant is a leading profit earning enterprise. Titanium di oxide (TiO2) is mainly used in paint industry. It is also used in inks, plastics, textiles, ceramics etc. India is one of the most prospective ...
• Design of an Accuracy Control System in Ship Building Industry 

  Eldho, Paul (2014)

  Ship production involves many stages of fabrication process. Throughout these processes it is expected that dimension variance may occur and if not managed properly it could cause dimensional problems which will lead to ...
• Effect of Surface Crack in a Composite Homogeneous Steel Cantilever Beam in Different Conditions by using Finite Element Method 

  Arun Sasi, S J (2014)

  The vibrational analysis of a composite cantilever beam is consider in this paper, the finite element method is used to find the frequencies and mode shapes of the cantilever beam for cracked and uncracked conditions. ...
• Design and Analysis of Wing Structure of Solar UAV 

  Suresh, R (2014)

  This paper deals with UAVs that are envisaged to fly solely with the help of solar power. The power required to keep these solar powered UAVs airborne is produced by solar cells. The objective is to design and analysis ...
• Design of Dual Media Electro Hydraulic Servo Actuator for Missile Application 

  V, Ramesh Babu (2014)

  Every Missile requires some guidance or steering to ensure that the required flight trajectory is achieved. Missiles are equipped with either Aerodynamic control system or Thrust vector control system to provide the ...
• Smart Helmet Using RF Technology for Underground Mines 

  Shabina, S (2014)

  The underground mines all over the world are adversely affected by various hazards including gaseous explosions, landslides, fire hazards, etc. This leads to the significance of safety for the mine workers. A better ...
• Recoil Reduction in a Rifle to Improve the Accuracy of the bullet 

  Avinash, P (2014)

  Recoil also called knockback or kickback is the backward momentum of a gun when it is discharged. The recoil caused by the gun exactly balances the forward momentum of the projectile and exhaust gasses according to ...
• Experemental studies and design of a flight capable cyclocopter 

  Moble, Benedict (2014-01-20)

View more